well my fuel gauge stopped working and was flicking on and off so i guessed it was a loose wire. replaced some of the wire because i could see damage but still not working. pulled it all apart a bit more and found the main connection had come loose. checked it and it work so i put it all together and now the horn, lights, electric start have all stopped working but the fuel gauge is working fine. i check a fuse near the battery and that’s fine battery is showing volts between 12/13 so that’s OK, and the scooter will start if i kick it but i cant get the lights or horn to work. couldn’t find any other fuses. any help would be great. oh and the scooter it a pulse 125cc 4 stroke.
scooter will only start by kick the electric starter stopped and lost lights and horn?
Previous post: what was your favorite toy as a kid?
Next post: ruckus 008
{ 2 comments… read them below or add one }
1 start at battery..recheck all wireing..battery should hold 12.6+ volts at rest
is the set up a combo alternator/starter? may be trouble with it,,thats the prob i had with my john deere mower
Since your losing so many electronic options at one time, I would best guess that your frame ground has come loose. Without the frame ground none of the electronic options will work.
Check your ground to frame. If you find that it is functioning properly. Get a volt meter and start testing away. Chase down the problem from battery to the problem source.